Capture Screen Overview

		Front/Rear camera toggle		Switch between front and rear cameras.
		ISO value		Displays the current ISO value. Tap to adjust the ISO value via dial (M and SI mode) or lock exposure (A mode).
		Exposure Compensation		Displays the current EV value. Tap to adjust the EV value via dial.
		Exposure Time		Displays the current exposure time. Tap to adjust the exposure time via dial (M and SI mode) or lock exposure (A mode).
		Flash		Tap to select Flash mode: Auto/On/Off. Long press to toggle Steady Light on or off.
		Focus control element		Move around to set focus to a specific point. Long press to lock the current focus setting.
		Exposure control element		Move around to set exposure metering to a specific point. Long press to lock the current exposure setting.
		Lens selector/Zoom		Toggle between the available lenses. Tap a selected lens or swipe along the lens buttons to zoom digitally.
		Auto Perspective Correct (APC)		Enable this button on the second page of the Control Panel. Tap to enable/disable APC for a perspectively corrected live preview and to automatically remove perspective distortion while taking a photo.
		Manual Controls Panel		Allows you to enable/disable manual controls for Exposure, White Balance, and Focus. The full manual controls are available in semi-automatic SI and manual M mode – in automatic A mode, you only see the WB control.
		Media Library		Tap to access the iOS Media Library ("Recents") and the internal ProCamera Media Library ("Lightbox" and "Private Lightbox")
		Camera mode selector		Tap to open the scrollable list of camera modes. Long press to quickly toggle between the first two modes in your list (you can customize the order via "Edit list" button).
		Shutter button		Tap to take a photo. If Rapid Fire is enabled in the Control Panel, tap and hold the Shutter button to take a series of photos.
		Secondary Shutter button		Tap Secondary Shutter to initiate capture process. In the Control Panel, various features can be assigned to this button: Self-Timer, ProTimer Intervalometer, Anti-Shake, or Quad-Shot.
		Control Panel		Tap to open the Control Panel. Swipe upwards on this button to quickly open Settings.

Depending on what other features are enabled (check page 2 of the Control Panel), you may also see the following buttons on the Capture Screen:

		Smart HDR		Tap to enable/disable Smart HDR. Button only shows when in manual M or semi-automatic SI mode.
		RAW Toggle		Tap to switch between your favorite RAW and non-RAW file formats.
		Black & White mode		Tap to enable/disable Black and White mode.
		Orientation Lock		Tap to enable/disable Orientation Lock. When locked, turning the device from landscape to portrait or vice versa will not have an effect on your captures.
		Mirroring		Tap to enable/disable the Mirroring feature. When activated, the viewfinder preview as well as your captures will be mirrored accordingly.
		Anamorphic Desqueeze		Tap to enable/disable Anamorphic Desqueeze (1.33x or 1.55x) when using anamorphic add-on lenses.